By Editorial TeamLet’s be real, you can get much better results from your waxing routine if you bring in some tech. Using Medicube devices with waxing is a great way to level up your skin prep and aftercare. So, how do you actually combine these routines to get super smooth, healthy skin without causing a mess?
Key Takeaways
- Use the Medicube Age-R ATS Air Shot to exfoliate before waxing. It lifts hairs for a better pull and seriously reduces your chances of getting ingrowns.
- Calm post-wax redness fast with the Medicube Age-R Derma EMS Shot on its lowest setting, which helps your skin recover quicker.
- Running the Medicube Age-R Booster-H with a serum before you wax helps everything absorb, leading to a much smoother experience.
- Always, always patch test a new device or product on a small, hidden patch of skin for at least 24 hours before you go all in.
- Clean your Medicube devices before and after every use, this is non-negotiable for preventing bacterial grossness on freshly waxed skin.
1. Pre-Waxing Skin Preparation with Age-R ATS Air Shot
Good prep is everything before a wax if you want to minimize pain and get a clean result. The Medicube Age-R ATS Air Shot helps by creating tiny micro-channels in the skin with its non-invasive “air shot” technology. For you, this means it lifts up all those fine hairs and gets rid of the dead skin cells that can trap hairs or prevent the wax from getting a good grip. It’s a simple step that makes a big difference.
Here’s how you do it: start with a clean, dry face. Put the device on its lowest setting, like level 1 or 2, because you’re just going for a light exfoliation, not a deep clinical treatment. Glide the device in upward and outward motions over the spots you’re about to wax. For your upper lip, for example, a quick 30 seconds is plenty. You might see a bit of temporary redness, that’s just increased microcirculation and it fades fast. You’re just setting the stage so the hairs are easy to grab and the skin is ready.
Pro Tip: If you get a lot of ingrowns on your jawline or neck, spend a little extra time with the ATS Air Shot in those spots. The micro-channels it creates can really help stop those hairs from curling back under the skin after the wax.
Common Mistakes: Don’t get overzealous. Cranking up the setting or using it for too long will just irritate your skin, which can make waxing more painful and might even cause the skin to lift. Keep it on the lowest setting for a short time.
2. Enhancing Product Absorption with Age-R Booster-H Before Waxing
Okay, so after you’ve exfoliated with the Air Shot, the next step is to apply a hydrating serum to prime the skin even more. This is exactly what the Medicube Age-R Booster-H is for. It uses electroporation, which is a fancy way of saying it temporarily makes your skin cells more permeable, letting your skincare products sink in way deeper and work better. Using it strategically after exfoliating but before waxing is a pro move.
Slap on a thin layer of a hydrating, non-comedogenic serum or pre-wax oil after you’ve used the ATS Air Shot. Then, grab the Booster-H and turn it on a low-to-medium setting (level 2 or 3 works fine). Glide it over the areas you applied serum to for about one to two minutes. You should feel a gentle warmth, not pain. This deep absorption makes the skin and hair follicles softer, which can mean a less ouchy wax and less trauma to your skin. It just gets your skin nice and pliable for the hair removal.
Pro Tip: Go for a serum with hyaluronic acid or aloe vera to get the most hydration and soothing benefits. Definitely stay away from anything with retinoids or strong acids right before you wax, as that’s just asking for irritation.
Perfectly shaped brows & flawless facial waxing
Precision brow, lip and facial waxing by trained specialists. Find a studio near you.
Find a Brow & Wax Studio →Common Mistakes: Don’t use too much product. A pea-sized amount of serum is enough. Too much will make your skin slick and the wax won’t be able to grip properly. Also, make sure the serum is mostly absorbed before you apply the wax. Just blot off any excess if you need to.
3. Post-Waxing Soothing with Age-R Derma EMS Shot
Right after you wax, your skin is angry. Calming it down fast is the main priority to stop irritation before it starts. The Medicube Age-R Derma EMS Shot is perfect for this, even though it’s mainly known for muscle toning. You’re going to use its low-frequency microcurrents to help reduce that post-wax inflammation and get circulation going to speed up recovery.
As soon as you’re done waxing and have cleaned off any residue, apply a thick layer of a calming gel like aloe vera or a dedicated post-wax soothing balm. Set your Derma EMS Shot to its absolute lowest setting, level 1, and use the “tapping” mode or just very gentle gliding motions. Work over the freshly waxed areas for a minute or two each. You’ll feel a very light pulsation, which is the gentle stimulation helping to bring down redness and swelling. The microcurrents also give your soothing products an extra push into the skin where they can do more good.
Pro Tip: I always tell people to keep their soothing gel in the fridge. Using the cold gel with the device provides incredible, immediate relief for that hot, sensitive feeling after a wax.
Common Mistakes: Do not use a high setting or any of the “lifting” modes on the EMS Shot right after waxing. That’s way too much stimulation for sensitive, freshly traumatized skin and will just make things worse. Start low and keep it gentle.
4. Targeted Aftercare: Addressing Ingrown Hairs with Age-R ATS Air Shot (Post-Wax)
Look, even if you do everything right, you’re still going to get an ingrown hair sometimes. It happens. The Medicube Age-R ATS Air Shot is useful here too, but you have to wait. Don’t even think about using this device immediately after waxing. Give your skin time to heal, at least 48 to 72 hours, or until any redness is completely gone.
Once your skin is back to normal, if you see an ingrown starting to form a bump, clean the area and bring out the ATS Air Shot again. Use it on the lowest setting (level 1) and just gently tap or glide it over that specific spot for about 15 to 30 seconds. The micro-channels it creates can help free the trapped hair by lightly exfoliating the skin on top. Then, you can apply a serum with something like salicylic acid which will be able to penetrate deeper and work on the problem. There’s even research, like a study in the Journal of the American Academy of Dermatology, that backs up how effective exfoliation is for conditions like ingrowns.
Pro Tip: In addition to this targeted treatment, use a soft washcloth for gentle physical exfoliation in the shower to keep your follicles clear. But never, ever scrub at an ingrown hair.
Common Mistakes: If an ingrown hair is super red, swollen, painful, or looks infected, leave it alone. Don’t try to fix it with a device. That’s a job for a dermatologist. And it should go without saying, but don’t pick or squeeze them either.
5. Maintaining Skin Health Between Sessions with Age-R Booster-H and Derma EMS Shot
What you do in the weeks between waxes is just as important as your prep and aftercare. Using your Medicube devices consistently will keep your skin in great shape, which makes every future waxing session smoother and less of a headache. This means regular use of the Booster-H to make your products work harder and the Derma EMS Shot for firmness and circulation.
A few times a week, make the Booster-H part of your normal skincare routine. After you cleanse and put on your serums, run the device on a medium setting (levels 3-4) over your face to make sure all those good ingredients are actually getting absorbed. Healthy, well-hydrated skin just doesn’t get as irritated from waxing. Then, use the Derma EMS Shot 2-3 times a week on a low to medium setting (levels 2-3). This helps maintain muscle tone and boosts circulation, which brings more nutrients to your skin to help it repair itself. This isn’t a quick fix. It’s about keeping your skin consistently ready for your next wax.
Pro Tip: Switch up your serums when you use the Booster-H to tackle different issues. Maybe a vitamin C in the morning and a peptide serum at night. The National Institutes of Health has tons of research if you want to geek out on what different ingredients do.
Common Mistakes: The biggest one is not cleaning your devices. You have to wipe the heads down with an alcohol wipe after every single use, or you’re just pushing bacteria into your skin. The other mistake is being inconsistent. You won’t see long-term results if you only use them once in a blue moon.
Basically, adding Medicube devices to your waxing routine isn’t just a gimmick. It’s a smart way to prep your skin, boost your products, and speed up recovery. When you combine good tech with a traditional method like facial hair removal, you get a much better handle on your overall skin health and the whole process becomes less of a chore.
Can I use Medicube devices right after waxing?
No. Give your skin time to recover. Wait at least 24 to 48 hours before using most Medicube devices, especially anything that exfoliates or stimulates the skin, because you need to let the immediate trauma from waxing calm down first.
Which Medicube device is the best for preventing ingrowns?
The Medicube Age-R ATS Air Shot is your best bet for both preventing and treating ingrown hairs. Its micro-needling action helps exfoliate and release trapped hairs. Just remember to use it a few days *before* waxing to prep, or several days *after* once your skin has fully calmed down.
Do I really need to clean my Medicube devices every time?
Yes, absolutely. Wiping down your devices with an alcohol wipe after each use is a must. It’s basic hygiene, and it prevents you from spreading bacteria onto your skin which is especially important when it’s sensitive or freshly waxed.
Can these devices actually make waxing hurt less?
They don’t directly numb the pain of the pull, but by helping you prepare your skin so well (through better exfoliation and hydration) and speeding up the post-wax recovery, the whole process becomes much less irritating. A less irritated experience often feels like a less painful one.
Are there any Medicube devices I should avoid when waxing?
Don’t use any device designed for intense exfoliation or deep muscle stimulation on skin that was just waxed. Common sense is your friend here. Always start with the lowest settings, and if you’re ever in doubt, check the device’s manual for its specific warnings about use on sensitive skin.
